CISH supplies, installs and commissions complete imported production lines; for a single simple machine, a jua kali workshop or local dealer is usually the better buy.

Four kinds of machinery supplier in Kenya

Supplier typeWhat they sellPriceWho answers for outputBest fit
Jua kali workshop or local fabricatorHammer mills, mixers, tanks, frames, block moulds, roasters, built to orderLowestThe workshop, informallySimple machines, repairs, add-ons
Local machinery dealerImported machines from stock or orderModerate, with stock markupThe dealer, machine by machineOne standard machine, quick delivery
Chinese factory, directMachines and lines by catalogueLowest for imported equipment on paperYou, after deliveryBuyers with their own engineers
Turnkey companyA complete line, specified, shipped, installed and commissionedBetween direct and dealerThe turnkey company, at agreed outputFirst lines and products where output decides the business

We do not name or rate Kenyan workshops, dealers or factories here. The comparison is by supplier type.

What jua kali does well, and where it stops

Kenya's informal sector is the country's biggest employer. The 2025 Economic Survey, reported by The Star, found that informal businesses created 703,700 new jobs in 2024, about 90% of new jobs outside small-scale farming, and the 2026 survey put the informal share of 2025's 822,100 new jobs above 80%. Many of those businesses are jua kali metalworkers.

Jua kali is strong at:

  • Hammer mills, posho mills and simple grinders.
  • Mixing tanks, stands, tables, chutes and conveyors.
  • Block moulds, pallets and manual presses.
  • Fast repairs, welding and modifications.
  • Copying a simple machine that is already working locally.

It usually stops at:

  • Precision parts: screws, dies, rollers, gears and bearings fitted to tolerance.
  • Food-contact stainless work to a hygienic finish.
  • Controls, sensors, drives and PLCs.
  • Machines that must hold a specification for years: fillers, form-fill-seal packers, pasteurisers, injection moulders.
  • Written guarantees of output and quality.

The honest answer is not "local or imported". It is which parts of your line can be local, and which need to be precision equipment.

Dealers: when one machine from stock is right

A local dealer is often right when you need one standard machine quickly: a deck oven, a screw press, a sealer, a small mixer. You can see the machine, buy in shillings and get service nearby. Watch for:

  • Machine-by-machine selling. A dealer rarely designs the line, so the machines may not match each other's speed.
  • Stock markup. You pay for the dealer's import costs and stock risk.
  • Spare parts. Ask which parts are held in Kenya and which come from the factory.

A complete imported line: when it pays

An imported line, specified as a whole and commissioned on your product, pays when:

  • Consistency sells the product, such as packed flour, bottled water, dairy, snacks or plastic packaging.
  • Food safety or standards apply, and you must prove temperature, hygiene or composition.
  • Output decides the margin, and a slow or unbalanced line loses money every shift.
  • Buyers audit you, such as supermarkets, exporters or institutions.

In our experience the machines are only part of a project's cost: in most lines we see, equipment is about 35–55% of the total, with the building, utilities, freight, installation, working capital and permits making up the rest.

A combined approach that works

Many Kenyan factories use both:

Part of the factoryUsually localUsually imported
Structural frames, platforms, stairsYes
Tanks without hygienic requirementsYes
Simple conveyors and chutesYes
Precision core machines (presses, rollers, fillers, moulders)Yes
Hygienic stainless process equipmentUsually
Controls and drivesYes
Repairs, welding, small modificationsYes

Ask the turnkey company or factory which items could be made locally, and price them separately. A line that uses local fabrication where it makes sense is cheaper to build and easier to keep running.

How to verify a supplier in Kenya

  • Business registration: check a company's registration with the Business Registration Service.
  • Tax registration: a supplier issuing invoices should have a KRA PIN and, if registered, charge VAT correctly.
  • Small enterprises: MSEA keeps a register of micro and small enterprises and supports formalisation; registered workshops are easier to contract with.
  • A working reference: visit a machine the supplier built or sold, running in Kenya.
  • Written scope: output, materials, delivery date and warranty on paper.

For imported equipment, verify the factory too. Our supplier audit approach explains what to inspect before paying a deposit.

The import side

ItemHow it applies
DutyCapital equipment is mostly duty-free under the EAC Common External Tariff; confirm each HS code
VAT16%
IDF and RDLImport Declaration Fee of 2.5% and Railway Development Levy of 2% on customs value
PVoCKEBS pre-export verification for regulated items, arranged in the exporting country
PortMombasa, with SGR or road inland

See our Kenya import guide for the sequence.

How to choose: a checklist

  1. Define the product first: specification, packs and daily output.
  2. Split the line into simple parts and precision parts.
  3. Ask jua kali or local fabricators to quote the simple parts.
  4. Ask a dealer where one standard machine from stock is enough.
  5. Ask for complete-line quotes for the core, with output guaranteed.
  6. Put every quote on the same scope before comparing.
  7. Verify registration, tax and references for every supplier.
  8. Check power for the whole factory, not machine by machine.
  9. Plan spares and maintenance before the line arrives.
  10. Agree commissioning and training in writing.

Making briquettes from charcoal dust or sawdust? See charcoal briquette machine prices in Kenya.

Ten questions to ask any machinery supplier

  1. What output will this machine or line give on my product, and how will you prove it?
  2. What materials are used for food-contact and wearing parts?
  3. Which parts are made in Kenya and which are imported?
  4. What power does it need, and what is the starting load?
  5. Who installs and commissions it?
  6. Who trains my operators?
  7. What does the warranty cover, and for how long?
  8. How fast can you repair it?
  9. Where can I see one running?
  10. Is the price in shillings or US dollars, and what does it include?

Price ranges by line

For prices, see our Kenya guides: posho mills and maize mills, block and cabro plants, and nail making machines. Each compares a single local machine with a complete line.

Common mistakes

  • Buying a copied machine for a precision job. It runs, but not to specification.
  • Mixing machines from different sellers without a line design. Speeds do not match.
  • No written output guarantee. Disputes follow.
  • Ignoring the import levies. Duty may be zero, but VAT, IDF and RDL are not.
  • Forgetting local support. Even imported lines need local welders and electricians.

What we see in Kenya

  • A large informal engineering base. Informal businesses created about 90% of new jobs outside small-scale farming in 2024.
  • Informal still dominates new work. More than 80% of the 822,100 new jobs in 2025 were informal, according to the Economic Survey reported by The Star.
  • Support for formalisation. MSEA registers micro and small enterprises and runs a one-stop Biashara Centre at Kariobangi with KRA, KEBS and KIRDI services.
  • Registration checks are easy. Company registration and KRA PINs can be checked before you sign.
  • Low duty on machinery. Most capital equipment enters free of EAC duty.
  • Levies still apply. VAT at 16%, the 2.5% IDF and the 2% RDL are paid on imported machines.
  • PVoC comes first. Regulated items are verified before shipment.
  • Combination is common. Imported cores with locally made frames and tanks keep costs and downtime down.

Where CISH fits

CISH is a turnkey company. We specify complete production lines from audited factories in China against your product, ship and clear them into Kenya, install and commission them with output demonstrated on your product, and train your operators, and we will tell you which parts a local workshop can make. For a single simple machine, a jua kali workshop or local dealer is usually the better choice, and we will say so.