Inspection bodies appointed by KEBS inspect the goods, review documents and, where needed, test samples in the exporting country, then issue a Certificate of Conformity (CoC) that Kenyan customs require at the port. In 2026 the programme changed: the old contracts for general goods expired on 8 February 2026, and in March KEBS announced nine appointed inspection companies, including SGS, Intertek, Bureau Veritas, TÜV, Cotecna and Chinese bodies, with country zones set out in the PVoC manual. Goods from countries with no appointed company are inspected on arrival for 0.6% of customs value, with a minimum of US$300 and a maximum of US$3,500, plus testing. Earlier KEBS rules exempted machines, spares and raw materials imported by registered local manufacturers; confirm the current exemption before you ship. CISH plans PVoC together with the factory acceptance test for every line it supplies to Kenya.
Regulations change. Confirm the current requirement with the authority named in each section before you commit money.
What PVoC is
| Item | What it means |
|---|---|
| Who runs it | Kenya Bureau of Standards (KEBS), under the Standards Act, Cap 496 |
| Who inspects | Inspection companies appointed by KEBS, each for a zone of countries |
| When | Before shipment, in the exporting country |
| What you get | A Certificate of Conformity (CoC), or for some routes a Certificate of Inspection |
| Why it matters | Kenyan customs require the certificate for regulated goods; without it, goods are inspected at the port at a higher fee |
Authority: KEBS.
The 2026 changes
- 8 February 2026: the previous PVoC contracts for general goods expired. Shipments dispatched after that date without a valid CoC were subject to destination inspection in Kenya, reported at a 0.6% fee during the transition.
- March 2026: KEBS published a public notice appointing nine inspection companies for general goods: SGS, Intertek, CHIC, CIC, TÜV, Bureau Veritas, ASTC, Cotecna and QISJ. The zones each company covers are in the PVoC manual on the KEBS website.
- From 1 March 2026: consignments shipped from countries with an appointed company must be accompanied by a CoC. If not, they are subject to destination inspection at a fee equal to 5% of the approved customs value, as set in Legal Notice No. 78 of 2020.
- Countries with no appointed company: goods continue to be inspected at destination for 0.6% of the approved customs value, with a minimum of US$300 and a maximum of US$3,500, plus laboratory testing where samples are taken.
Authority: KEBS. Check the current manual and zone list before you book.
Does your machinery need a CoC?
PVoC applies to regulated products. Whether a particular machine, spare part or line is regulated depends on its HS code and the KEBS list in the current manual. Points to check:
- Exemptions for manufacturers: under the earlier programme, raw materials, machines and spares imported by registered local manufacturers were listed among exempt goods, along with products carrying the KEBS Diamond Mark and goods waived by the Cabinet Secretary. Ask KEBS whether your company is registered for this exemption and whether it still applies to your consignment.
- Mixed consignments: a line often ships with motors, cables, control panels, tools and spare parts; some may be regulated even if the main machine is exempt.
- Used and refurbished machines: inspection bodies will check condition and documents; ask before you buy.
Authority: KEBS; the appointed inspection body for your zone.
The steps for a machinery shipment
- Classify the goods by HS code and check whether they are regulated or exempt.
- Identify the inspection body for the exporting country's zone, for example China.
- Submit a Request for Certification with the pro-forma invoice, packing list, technical documents and test reports.
- Inspection at the factory or warehouse, often best combined with your factory acceptance test and pre-shipment check.
- Sampling and testing where the inspection body requires it.
- Certificate of Conformity issued and sent to the importer.
- Customs clearance at Mombasa with the CoC, the Import Declaration and other documents.
Authority: the appointed inspection body; Kenya Revenue Authority for clearance.
Fees
The inspection body charges for issuing a CoC, usually a percentage of the FOB value with a minimum and a maximum, plus testing if samples are taken; get a written quote before shipment. The cost of not having one is much higher: 5% of the approved customs value for goods from appointed zones. On a line with a customs value of US$300,000, that is about US$15,000.
Authority: KEBS and the appointed inspection body.
Duties and levies at the port
PVoC is separate from duties and taxes. Capital goods usually enter Kenya at 0% under the EAC Common External Tariff, but 16% VAT, the 2.5% Import Declaration Fee and the 2% Railway Development Levy apply to customs value. Our Kenya import guide sets out the full sequence.
Authority: Kenya Revenue Authority.
Combine PVoC with your own checks
Plan the PVoC inspection for the same visit as the factory acceptance test and pre-shipment inspection, so the inspection body sees the finished, tested machines before they are crated. Make sure the invoice, packing list and nameplates match, and that the technical documents are in English. A late certificate delays shipment and adds storage costs; a missing one adds 5%.
Worked example: a bottling line from China
A water bottler in Nakuru buys a complete bottling line from China. The importer checks with KEBS whether its registration as a manufacturer exempts the machines, and finds that the control panels and spare motors must still be certified. The supplier's factory acceptance test is booked for the same week as the inspection body's visit; the inspector checks the machines, documents and nameplates, and the CoC is issued before the containers are loaded. The line clears at Mombasa without destination inspection. The steps are illustrative.
Common mistakes
- Shipping before the CoC is issued.
- Assuming all machinery is exempt.
- Wrong or inconsistent HS codes between invoice and certificate.
- Documents only in Chinese.
- No buffer for inspection and testing time.
Documents to prepare
Prepare a commercial invoice with HS codes, a packing list with case numbers, technical descriptions and manuals in English, test reports or certificates for electrical items, and photographs of nameplates. Make sure the invoice, packing list, nameplates and certificate agree, because mismatches cause delays at Mombasa. Keep copies with your clearing agent and the inspection body.
Where CISH fits
On every line CISH supplies to Kenya, we classify the goods, check PVoC requirements and exemptions with the importer, arrange the inspection with the appointed body alongside our factory acceptance test, ship to Mombasa with the certificate in hand, clear, install and commission the line. Certification decisions belong to KEBS and its appointed bodies.