You apply on KEBS's KIMS portal and pay through eCitizen; KEBS reviews the application and assigns an officer, who inspects your production process and controls, draws samples and agrees a scheme of supervision and control with you; samples are tested at KEBS or another accredited or designated laboratory; you correct any nonconformities; and KEBS issues a permit, reported as valid for two years, with surveillance inspections at the factory and in the market during that time. Fees are set by firm size and number of products; check KEBS's current schedule. For a new factory, the practical lesson is to design the line, quality control and records around the standard from the start. CISH supplies, installs and commissions production lines with the quality control equipment and documentation a KEBS inspection looks for.

Regulations change. Confirm the current requirement with the authority named in each section before you commit money.

Which products need the S-Mark

The S-Mark applies to products manufactured in Kenya for which a Kenyan Standard is mandatory. Common examples include many foods and drinks, such as flour, cooking oil, bottled water, juices, dairy products and baked goods, as well as building materials, soaps and detergents, plastics and many household products. Start by finding the Kenyan Standard for your product in KEBS's standards catalogue and checking whether it is mandatory. Sector regulators may also apply: dairy processors need a Kenya Dairy Board licence, for example, and food premises need county health approvals.

Authority: Kenya Bureau of Standards (KEBS), under the Standards Act, Cap 496.

The S-Mark and the Diamond Mark

Standardization Mark (S-Mark)Diamond Mark of Quality
StatusMandatory for products under a mandatory standardVoluntary premium mark
WhoLocal manufacturersManufacturers with mature quality systems
RequirementProduct meets the standard; factory controls in placeS-Mark plus a strong quality system, often ISO 9001, and good surveillance history
UseLegal requirement to sellMarketing and buyer preference

Most new manufacturers start with the S-Mark and consider the Diamond Mark later.

The process, step by step

  1. Confirm the standard for your product and its requirements.
  2. Prepare the application on KIMS: company and factory details, product details, the standard, process flow, quality control procedures and supporting documents.
  3. Pay the application and inspection fees through eCitizen.
  4. Officer assigned: KEBS reviews the application and assigns an inspector.
  5. Factory inspection: the officer checks your production process and controls, draws samples and agrees a scheme of supervision and control with you.
  6. Laboratory tests: samples are tested at KEBS or another accredited or designated laboratory.
  7. Corrective action: if samples fail or nonconformities are found, you fix them and inform KEBS.
  8. Permit issued: once you comply, KEBS issues the permit; you print the S-Mark and permit number on your label.

Authority: KEBS Quality Assurance and Inspection.

What the inspection looks at in your plant

  • Production capacity: that you can make the product consistently, not just a sample batch.
  • Process control: written procedures, process checks and records at the critical steps.
  • Raw materials: specifications, supplier checks and incoming tests.
  • Quality control: in-process and finished-product tests to the standard, with calibrated instruments.
  • Hygiene and safety: for food, clean premises, staff hygiene and pest control; for all products, safe working conditions.
  • Packaging and labelling: labels that meet the standard and labelling rules.
  • Records and traceability: batch records that link raw materials to finished products.

What this means for your equipment

When you buy a line, specify it against the standard:

  • Process equipment that can hold the parameters the standard depends on, such as temperatures, moisture, fill weights or strength.
  • Quality control equipment: moisture meters, balances, pH meters, viscometers, strength testers or whatever your standard's tests need, with calibration certificates.
  • Contact materials suitable for food or chemicals.
  • Coding for batch numbers and dates on every pack.
  • Documentation: manuals and procedures you can turn into the SOPs the officer will ask for.

The scheme of supervision and surveillance

The scheme of supervision and control agreed at inspection sets what you test, how often and how you record it, and how KEBS will check you during the permit's life. KEBS carries out surveillance inspections at your factory and in the market. Keep your records up to date, because surveillance compares what you said you would do with what you actually do. If market samples fail, KEBS can take action against the permit.

Validity and renewal

The permit is reported as valid for two years from issue. Plan renewal early so your labels never show an expired permit. Certified products are listed in KEBS's online database. Changes to the product, the formula, the process or the factory location usually need KEBS's approval.

Authority: KEBS.

Imported equipment: PVoC is a separate matter

The S-Mark covers the products you make. Machinery you import for your factory is handled at the border under KEBS's Pre-Export Verification of Conformity programme where it applies; our guide to KEBS PVoC for machinery imports explains it, and our guide to importing a production line into Kenya covers duties and clearance.

Business basics

Register your business with the Business Registration Service, register with KRA for tax and, above the threshold, VAT, and obtain county permits and health approvals for your premises. Keep these documents ready, because they are part of most applications.

Worked example: a cooking oil refinery in Nakuru

A company in Nakuru installs a small refining and filling line for sunflower oil. Before ordering, it checks the Kenyan Standard for edible oils and specifies the line with a filter press, deodoriser and filler that can hold the standard's parameters, plus a small laboratory for free fatty acids, peroxide value and moisture. It writes SOPs and batch records, applies on KIMS, hosts the inspection, and agrees a scheme of supervision. After its samples pass, it prints the S-Mark and permit number on its bottles and supplies supermarkets that check the KEBS database. The figures and names are illustrative.

Common mistakes

  • Starting sales before the permit for a product under a mandatory standard.
  • No quality control equipment for the standard's tests.
  • Records that stop after the inspection.
  • Changing the formula without telling KEBS.
  • Labels without the permit number or with an expired permit.

Preparing for the inspection

Treat the inspection as a rehearsal of normal production, not a show. Run the line on your product on the day, with operators doing their usual jobs and records filled in as they go. Have your procedures, raw material specifications, calibration certificates, batch records and test results ready in one file, and make sure the people who do the tests can explain them. Clean the premises, but do not hide problems: an inspector who finds an honest corrective action log trusts the system more than one who finds nothing written down.

Using the mark in the market

Supermarkets, wholesalers and public buyers often check the KEBS database before listing a product, and some ask for a copy of the permit. Print the mark and permit number clearly, keep the permit current, and tell buyers when it is renewed. Certification can also help in export markets within the East African Community, where buyers recognise KEBS marks.

Where CISH fits

CISH supplies, installs and commissions production lines in Kenya from audited factories in China, specified against the Kenyan Standard for your product, with the quality control equipment, coding and documentation a KEBS inspection looks for. Certification stays with you as the manufacturer; we build the line so it can pass, and train your team to run and record it.