You apply online with a letter to the Director-General, upload documents including your business registration, tax number, trademark, label, certificates of analysis, pest control evidence, staff medical fitness certificates, SOPs, an equipment list, a process flow chart and HACCP plan, and appointment letters for a technical officer with at least an OND; pay through Remita; and NAFDAC schedules an inspection. If the inspection is satisfactory, registration samples are taken for laboratory analysis; if not, you receive a non-conformance notice to correct. NAFDAC's facility guidelines are specific about the building and equipment: at least four rooms (cloak room, packaging material store, production and finished product store), no wooden or prefabricated buildings, smooth washable surfaces, insect-proof screens, product-contact parts in food-grade stainless steel or similar materials, and for water a borehole of at least 150 feet at least 30 metres from any septic tank, PVC or stainless steel tanks and pipes, micro-filtration down to 0.5 µm and a UV sterilizer with an alarm at the final point.
Regulations change. Confirm the current requirement with the authority named in each section before you commit money.
Who must register
Every regulated pre-packaged food and feed product manufactured, imported, exported, advertised, sold, distributed or used in Nigeria must be registered under the NAFDAC Act and its guidelines. For a factory, that means registering each product and passing an inspection of the facility that makes it. Packaged water, in sachets or bottles, has its own facility guideline.
Authority: NAFDAC, Food Safety and Applied Nutrition (FSAN) Directorate for facility inspection; Food Registration and Regulatory Affairs (FR&RA) Directorate for product registration.
The process, step by step
- Application: submit online through NAPAMS, with a letter on company letterhead to the Director-General, for the attention of the FSAN Directorate, stating the factory's physical address (not a P.O. box), contact details, product name, description, pack size and packaging material, signed by the managing director or a designated person.
- Documents: upload the documents listed below, in the order NAFDAC sets. Incomplete or inaccurate files are not progressed.
- Payment: generate a Remita invoice and pay the applicable fees from NAFDAC's tariff.
- Inspection: after vetting, NAFDAC schedules an inspection of the facility.
- Outcome of inspection: a non-conformance notice if unsatisfactory; if satisfactory, registration samples are drawn for laboratory analysis.
- Approval: after documents, inspection and laboratory reports are satisfactory, products go to an approval meeting; approved products receive a certificate of registration, and others receive compliance directives.
The registration guideline sets a processing timeline in working days, and the clock stops when compliance directives are issued. Answer directives quickly: the food registration guideline closes applications not answered within 90 working days, and the packaged water guideline sets 15 working days for responding to queries.
Authority: NAFDAC.
Documents NAFDAC asks for
| Document | Notes |
|---|---|
| Business incorporation or business name | CAC registration |
| Tax Identification Number | TIN |
| Trademark registration | Evidence of the brand |
| Product label and packaging | Artwork for each product |
| Certificates of analysis | Raw materials and finished product |
| Pest control | Current fumigation certificate |
| Food handlers' medical fitness | Including typhoid and hepatitis A vaccination and laboratory tests |
| Contract manufacturing agreement | Where applicable, notarised |
| Organogram | Key officers and qualifications |
| Technical officer | Appointment letter; scientific background, at least OND |
| SOPs | Production, quality control, cleaning, complaints, recall |
| Equipment list | Production and quality control equipment and their sources |
| Process flow chart and HACCP plan | For each product |
| Raw materials and sources | List |
| Training | Plan and records |
What NAFDAC expects of the building
- Rooms: at least four, designated as cloak room, packaging material store, production section and finished product store, arranged in a logical production flow, with separate storage for raw materials and finished products.
- Location: fenced off from other buildings, and not near a cemetery, abattoir, quarry, sewage plant, dump site, sawmill, oil depot, cement factory or other source of contamination.
- Construction: not wooden or prefabricated; floors, walls and ceilings smooth, hard and easy to clean; floors cemented, terrazzo, tiled or epoxy; ceilings of non-asbestos, non-flaking material.
- Screens and doors: insect-proof screens on windows and doors, self-closing doors.
- Staff facilities: toilets that do not open directly into production, hand-washing, and no eating, drinking or smoking in production areas.
Authority: NAFDAC FSAN Directorate.
What NAFDAC expects of the equipment
- Product-contact parts made of non-toxic, non-reactive materials such as food-grade stainless steel.
- Design that minimises cross-contamination and allows cleaning and maintenance.
- Calibration of production and laboratory equipment, with records.
- Laboratory equipment for critical tests, or a documented contract with a third-party laboratory where the factory cannot do comprehensive analysis itself.
When you buy a line, ask the supplier to confirm contact materials in writing, provide calibration certificates for instruments, and include cleaning procedures in the manuals. These feed directly into your equipment list and SOPs.
Water treatment for food and packaged water factories
| Requirement | NAFDAC guideline |
|---|---|
| Water source | Public mains, spring or borehole of at least 150 feet |
| Borehole distance | At least 30 metres from the nearest septic tank |
| Tanks | PVC or stainless steel; galvanised steel only with food-grade epoxy lining |
| Pipes (packaged water) | Stainless steel or PVC; iron pipes not allowed |
| Filtration | Sand and activated carbon filters; micro-filters down to 0.5 µm in descending pore size |
| Disinfection | UV sterilizer with an indicator or alarm, at the final point before use; chlorination at 2–4 ppm where applied |
For packaged water, NAFDAC also expects automated form-fill-seal or bottling equipment and hygienic filling areas. Our guide to starting a pure water business in Nigeria covers the plant.
Registration validity and renewal
A successful product receives a certificate of registration valid for five years for full registration, or two years for listing. A renewal application can be started six months before expiry, and renewal includes a GMP re-assessment of the facility. Registration does not include permission to advertise; that is a separate approval. NAFDAC may revoke, suspend or vary a certificate during its validity. Labels must meet NAFDAC's pre-packaged food labelling regulations.
Authority: NAFDAC FR&RA Directorate.
Importing the line
Production lines are usually imported through Nigerian ports with Form M and the duties and levies that apply to the tariff heading. Plan the building, water system and SOPs while the equipment is being made, so that the factory is ready for inspection soon after installation. Our guide to importing a production line into Nigeria explains the import side.
Worked example: a bottled water factory in Abuja
An investor in Abuja plans a bottled water plant. Before ordering equipment, she checks her borehole depth and its distance from the nearest septic tank, designs a building with the four required rooms and a hygienic filling room, and specifies stainless steel pipes, sand and carbon filters, micro-filters to 0.5 µm and a UV sterilizer with an alarm at the final point. She appoints a technical officer with an HND in microbiology, writes SOPs, and submits her NAPAMS application while the line is shipped. After inspection, samples are taken and her product is registered. The figures and names are illustrative.
Common mistakes
- Building first, then finding the layout fails NAFDAC's room and flow requirements.
- Iron pipes or unlined tanks in water systems.
- No UV alarm at the final point.
- Missing SOPs, HACCP plan or staff medical certificates.
- Late responses to queries and compliance directives.
Where CISH fits
CISH supplies, installs and commissions food and packaged water lines from audited factories in China, specified with food-grade contact materials, water treatment to NAFDAC's guideline, and documentation for your equipment list and SOPs. Registration with NAFDAC stays with you as the manufacturer; we build the line so it can pass inspection, and train your team.